AURIX™ocd

Cerca nel blog

The final GOAL

in data aprile 12, 2021

Ottieni link
Facebook
X
Pinterest
Email
Altre app

Let's build something like this:

that could work with AURIX™ products!

Ottieni link
Facebook
X
Pinterest
Email
Altre app

Commenti

Posta un commento

Post più popolari

Let's Flash our code

Initially I thought I had to develop also the flasher application as part of my AURIXocd project (now renamed as 'AurixDebugger'). But, then I found that Aurix Development Studio (ADS), from version 1.4 is also delivering a flasher application. You can find it in the ADS installation folder. In my case it is under: C:\Infineon\AURIX-Studio-1.4.0\plugins\com.infineon.aurix.tools_1.4.0\build_system\tools\AurixFlasher_v2.2.1.0 By reverse engineer, I found some command line options, as: -help: to get help -detect: to connect and detect the target hardware only (e.g. what AURIX™ board/device is connected to) -hex: to specify the INTEL HEX file to be flashed into AURIX™ device. Actually I just did some experiments and found the way to use the '-hex' option by command line, as for example: > AurixFlasher.exe -hex C:\...\AURIX-v1.4.0-workspace\Arduino_KIT_TC275_LK\Debug\Arduino_KIT_TC275_LK.hex Such, in my system results into: And I confirm that works, since my 2 LED are b...

Let's build our own On Chip Debugger application - STEP 1

Do you remember the old nice times when we had only Microsoft debug?! Well, it's time to extend our AURIX™ocd with the dump and ascii features! Add the Dump feature This feature can be easily added by creating a new command: Dump memory: dump <addr> <n_bytes> thus imply a read loop from the given address, as in the below code snippet: // DUMP viewer else if (strncmp(cmd, "dump", 8) == 0) { if (n_items < 3) { printf("Syntax: dump <addr> <n_bytes>\n"); continue; } txDemo.addr.address = param0; for (uint32_t i=0; i < param1; i++) { if (i%4 == 0) printf("\n0x%8.8X: ", txDemo.addr.address); value = 0xEEEEEEEE; ret = mcd->read32(core, &txDemo.addr, &value); mcdd_han...

Let’s build our own TriCore de-assembler for AURIX™ - STEP6

One standard feature is showing the current instruction de-assembly. Such could be achieved in two ways: By parser the project code ELF file By decoding the instruction that is under execution during in the selected CPU Definitely the second approach is more flexible since it could be performed even without the source codes and fitting to my purpose: reverse engineering. Therefore, I decide to implement my own de-assembler for TriCore ™ processor. Let me try to explain what has to be done. Let's take the ABS instruction (source TC1.6 - page 49 ): where is clear that the instruction opcode for ABS is x1Cxxx0Bh. Therefore in my AURIXdebugger I will implement a structure like this: {0x01C00B, 32, "ABS", "absolute Value", "ABS D[c], D[b] ", "Put the absolute value of data register D[b] in data register D[c]"} where: typedef struct deASM_n { uint32_t uiOpCode; // Opcode (e.g. 0xDC for 'ji') uint8_t uiOpCodeLengh; // Lenght ...

Powered by Blogger

AURIX™ is a trademark of Infineon Technologies